I only recently got set up with a beer gas tank and stout faucet and have trouble with an excessive head on the dispensed beer. It may be that when it was originally kegged it was with CO2 only and I believe that this will have put too much into solution. What is my best option: (1) release all pressure on the keg and let it flatten before re-pressurising with nitro blend OR (2) give up on the Nitro blend on this keg and revert to straight CO2?
I think I read that the pressure for Nitro should be between 30 - 40 psi. I am currently running this keg at about 25 psi but continue to have major foam issues (all foam, no beer) on the initial pull. I think it is because it is over carbonated and is dispensed through the stout faucet.
Not sure what is the best way out of this and all advise will be welcomed.
I think I read that the pressure for Nitro should be between 30 - 40 psi. I am currently running this keg at about 25 psi but continue to have major foam issues (all foam, no beer) on the initial pull. I think it is because it is over carbonated and is dispensed through the stout faucet.
Not sure what is the best way out of this and all advise will be welcomed.