kornkob
Resident Crazy Uncle
So Ventmatic responded and offered up ss ventmatic faucets from their new batch for 34.95 each direct from them. They say they'll ship the first week of June.
Along with this came an upsell for something they call the UltraFlo Gate Kit and some other docs about kegging beer.
ULTRAPOUR Gate Kit Promo
Flow Gate doc
Along with this came an upsell for something they call the UltraFlo Gate Kit and some other docs about kegging beer.
ULTRAPOUR Gate Kit Promo
Ultra-Pour Promo Kegerator Kit
1) SS Ultra-Flo-vm Faucet normal price $36.95
1) 2000ss Gasket Kit normal price $10.00
1) SS 3 in. or 4 in. Straight shank or Tower Shank or Ausi-Snapshank with all fittings your choice:
(If you do not need SS Shanks substitute with10mm & 12.5mm Spouts)
We use 304 Stainless Steel. normal price $21.00
All shanks are come assembled with
Collar
Stop Ring
Stop Ring Keeper
Shank Nut
SS 1/4in. I.D.Tail Piece
Tail Nut
Gasket
1) Ultra-Pour Flo-Gate Kit normal price $65.95
Comes assembled with:
KR - Flo-Gate
Two ss splicers
8in. keg line 1/4in I.D.
Two Large ring clamps
6ft. Shank line 3/16in I.D.
Two small ring clamps
Total cost without promo $133.85
Promo price $89.95
Note:
Added Bonus: If Two Ultra-Pour kits are ordered with Shanks; One 10mm Spout and 0ne 12.5mm are added to shipment at No Charge. A $21 Value
Order today 414-217-8406
Flow Gate doc
Innovative inline restriction design reduces common beer foam problemsThe Flo-Gate®
By inserting a Flo-Gate in the Beer Line below the Tap Tower you can increase your restriction
US Patent Number 6,840,281 other foreign and U.S. patents pending
A quick-change velocity restrictor for beer lines. The most innovative advancement in beer line design in decades.
Our simple construction of twin PTFE friction channels increases backpressure compensation and just pours a better beer.
You need only two or three ring clamps and some 3/16in. I.D. tubing to splice the Flo-Gate into your beer line.
First review the layout of your beer lines. Pay close attention in the bar area just under the Tap Tower. We recommend the Flo-Gate be spliced in at this point. (4 or more feet from the Shank) use new 3/16 I.D. as needed.
For your Kegerator: Pre-assemble a Flo-Gate with 6ft. of new 3/16 I.D. at one end and 8-12 inches of new 1/4 inch I.D. beer line at other. Connect ¼ to the Keg. Note: The I.D. size of the keg coupler tailpiece may have to be changed to 1 / 4 in. Run the 3/16 I.D line to the shank. Check for leaks and set your regulator to the natural Keg pressure of the style of beer your pouring at temperature. Check youre Temp in the glass. Never use your regulator to control fill rate or speed of fill into the glass.
Check out our forced carbonation table and Fill Rate Chart from our web or call and we will e-mail them to you. For best pour control use the Ultra- Flo stainless steel faucet, its exclusive all new vent free seal forward free rotating design is super clean and patented.
If youre going to be the best and pour the best then use the best. Youve got a good start with the Flo-Gate now get a great finish with The ULTRA-FLO Faucet[FONT="] just the best bar none.[/FONT]
We will help you pour a great Beer.
Call today for the Flo-Gate that fits your need. You tell us what you have and well help you find what you need. Lets talk
ØFits all existing equipment
Works with all existing dispense equipment. You can add a Flo-Gate to old installations and keep the lines cooler and improve their pour. Flo-Gates splice freely inline and eliminate line routing interferences and bulking. No, wrapping, twisting, bundling and/or coiling chokes.
ØStainless steel makes beer taste better
Brass can taint the taste of beer. Vent-Matics Flo-Gates use Stainless Steel couplers and only FDA/NSF materials.
ØSmooth handling and control
A combination of twin PTFE friction channels ensures smooth beer handling action and our back pressure compensation designs allow you to create restrictor combinations for single or split line applications.
ØAdvanced design
Less waste! The restriction design allows for lower beer velocities, which helps to prevent rapid expansion that causes foam and loss of carbonation. The right restriction keeps the beer line packed out and the CO2 in solution. Remember the right faucet gives you control of the pour and thats the ULTRA-FLO Faucet, with interchangeable speed spouts
Ultraflow Dispense International Copyright 2005