I think you need to use the internal ip address of the iSpindHub (192.168.4.1).I thought I had config my is-index to connect to ispinhub but I am not seeing it on the web page could someone check over the screen shots and see where I might of gone wrong
Thanks
thanks wd16261can you have a look at the attached pic and indicate which on ei should use please
Thanks Peter
Again many thanks got it working now for the soldering and see if the screen works fingers crossedNo that is not the correct one you should not generate an API key but just look under the settings in Brewfather and look for Custom Stream instead:
View attachment 760718
I have hidden my key because if someone uses this key then his information will arrive in my database!
So I think it is better to remove your picture also.
thanks for the info i now have the D1mini connecting to brew father and my ispindel. I 'm now about to do the soldering and trying the screen, does the 2" screen download incorporate the mods made by Korev?What do you mean ?
The latest release is sending information to BF.
You want the same layout as @korev ? I'm currently working on revamping all screens and make them easily editable.
You could probably modify FermWatch to have the iSpindel reporting via BPL but you would lose the OG and Estimated FG, unless you were to create an entry perhaps by WiFiManager to enter those values.Is there a way to use fermwatch without a brewfather subscription ?
I use brewpiless and ispindel only.
@ZeSlammy Don't let fermwatch distract you too much while on holiday,Ispindhub is a brilliant project.
Any improvements are most welcome!
Cheers
Yes, I have used BPL 4.1r4 with a D1 Mini and an ADS1115 to monitor pressure until - the unfortunate accident of attaching the gas out to the liquid out on my All Rounder and the transducer did not like the wort up it.@korev
That is a great piece of work. Wish I'd ordered the 2.8 screen instead of the 2.0 but I'll get on and order one.
Just wondering have you set up your brewpiless with a pressure sensor and or also set it up to autospund ?
If so wondering which bits of hardware you ordered for that aspect.
@Thorrak might be able to help put the firmware onto brewflasher for this project.
All you really need is the D1 mini chip and a usb cable to flash it and power it. The extra antenna soldered on helps but not necessary.Is anyone building these and selling them, the repeaters?
As @DuncB mentioned, the bare minimum you need is a D1 Mini, cable and the instructions to make a repeater here: Homemade WiFi exender using the ESP8266 (or many other places on the Internet)Is anyone building these and selling them, the repeaters?
The signal from the AP to inside the box (through the brick wall) will be the one of concern.I ferment in kegmenters (stainless steel) and they are inside a Beverage Air cooler/refrigeration box that sit ~100 feet for the router/wifi access point, with a brick wall that has a window that is almost in direct line, although there is a wood frame building in the way.
My concern is it being inside the kegmenter, inside the Beverage Air cooler, it has a metal shell and the interior is lined with metal.
Not sure if this is the right place to put this but the FermWatch project was inspired by @ZeSlammy
FermWatch – Monitoring fermentation with Brewfather®, BrewPiLess and iSpindel or "No phone No worries!"
How to Guide and software GitHub - Hwerow/FermWatch: Monitoring fermentation with Brewfather®, BrewPiLess and iSpindel.
Cheers
P
So let me get this straightOn the other hand I'm hoping that @ZeSlammy can add some of the features into his project like converting ispindle plato info to SG. I use plato formula in my ispindels because this is the default for BF.
So let me get this straight
- You are using the Plato Formula but you'd like to see the SG on the display ? Yes correct
- You are using Plato because BF is Plato ? Yes correct
I've never used Plato because I'm putting [SG] at the end of the name of all my iSpindels so that BF handle them as "SG reporting devices". Yes I'm aware of this option but it would be nice to have this option also in the ispinhub
@DuncB there is enough capacity for the display and the repeater part.
Sorry I used a wrong word, I did not mension a Wifi repeater but just a device that forwards the information from the ispindel to (in my case) Brewfather!
I'm polishing the "screen language" but I'm hitting some roadblocks
In the beginning I also connected both the ispinhub and ispindel to the my local wifi network but I found out that it was less reliable this way. Sometimes the information of my ispindel was not received by the ispinhub. And my Wifi router was just next to both so I don't think that is was a network issue.I've previously connected my ispindels to my network via a repeater and then had the Slammy connect to that network as well. This way I get information on brewspy and the Slammy.
Hi I'm sorry it's not working for you. FermWatch is not designed to be a repeater it is just a display. Are you sure that you Base64 encoded your id etc?I have tried Fermwatch but for me it failed. I could not get the BF Authorisation code in correctly although it was correctly entered when I checked the serial monitor!
Further I found this to much complicated for what I'm looking for. I just want to see my iSpindel readings on a display that is on top of my fridge and a wifi repeater at the same time just like the iSpinhub does.
On the other hand I'm hoping that @ZeSlammy can add some of the features into his project like converting ispindle plato info to SG. I use plato formula in my ispindels because this is the default for BF.
Enter your email address to join: