bovine_OB
Well-Known Member
- Joined
- Oct 26, 2017
- Messages
- 86
- Reaction score
- 38
For Sale: complete homebrewery, the entire works
E-HERMS + Controller:
Auberins DSPR120
40A SSR, 40A heatsink
50 cal ammo box enclosure.
~20' 10-4 cable
5500w ripple element w/ hotpod
50' SS herms coil
Bottom drain keg HLT
Mash tun:
48 qt rectangular cooler w ball valve
1/2" copper drain manifold
Boil:
Bayou 1064 15 gal SS stockpot with ball valve
Avantco 3500w induction cooktop (240v)
Pump:
MKII pump w/ stainless head
Fermentation:
(3) 5 gal glass carboys
Assorted airlocks/blowoff accessories
Assorted pressure transfer accessories
Serving:
5.1 cu ft chest freezer
(2) Inkbird STC-1000 temp controllers
(2) 5 gal ball lock kegs
(2) intertap taps with 3" shanks
(1) 20lb CO2 tank
C3PO dual regulator
All required tubing/connections/etc
Extras:
All required 1/2" silicone tubing.
(1) 25' counterflow chiller
(1) 15 gal keg, untouched with the exception of some scuffs.
(1) Phil Mill - hand crank is attached, but does come with drill attachment.
(1) 25' 1/2" potable water hose
(1) Biermuncher bottle filler
Numerous bottles, caps, capper, misc grains, and all the Cascade leaf hops you can shake a stick at (2019 crop).
All brewery connections are 1/2" camlock, there are extras I will throw in that I have laying around.
Would like to sell as one unit, not interested in breaking apart at this time.
Located in Nebraska, will possibly deliver within reason.
Just calculated value of all these parts, worth well over $1500 if you were to buy all brand new and put together yourself. I understand the sweat equity is what makes this hobby (for me, at least), which is why I would let this go for $1300. This has been a great hobby for me, I can brew some fantastic brews. Unfortunately, life gets a little busy sometimes and I don't have the time anymore. In addition to delivery, I could certainly demo a brew day. This would be a great investment for a brew club, or an easy way into a top notch brew setup.
Thanks to HBT for the (online) fellowship, and thanks for looking.
E-HERMS + Controller:
Auberins DSPR120
40A SSR, 40A heatsink
50 cal ammo box enclosure.
~20' 10-4 cable
5500w ripple element w/ hotpod
50' SS herms coil
Bottom drain keg HLT
Mash tun:
48 qt rectangular cooler w ball valve
1/2" copper drain manifold
Boil:
Bayou 1064 15 gal SS stockpot with ball valve
Avantco 3500w induction cooktop (240v)
Pump:
MKII pump w/ stainless head
Fermentation:
(3) 5 gal glass carboys
Assorted airlocks/blowoff accessories
Assorted pressure transfer accessories
Serving:
5.1 cu ft chest freezer
(2) Inkbird STC-1000 temp controllers
(2) 5 gal ball lock kegs
(2) intertap taps with 3" shanks
(1) 20lb CO2 tank
C3PO dual regulator
All required tubing/connections/etc
Extras:
All required 1/2" silicone tubing.
(1) 25' counterflow chiller
(1) 15 gal keg, untouched with the exception of some scuffs.
(1) Phil Mill - hand crank is attached, but does come with drill attachment.
(1) 25' 1/2" potable water hose
(1) Biermuncher bottle filler
Numerous bottles, caps, capper, misc grains, and all the Cascade leaf hops you can shake a stick at (2019 crop).
All brewery connections are 1/2" camlock, there are extras I will throw in that I have laying around.
Would like to sell as one unit, not interested in breaking apart at this time.
Located in Nebraska, will possibly deliver within reason.
Just calculated value of all these parts, worth well over $1500 if you were to buy all brand new and put together yourself. I understand the sweat equity is what makes this hobby (for me, at least), which is why I would let this go for $1300. This has been a great hobby for me, I can brew some fantastic brews. Unfortunately, life gets a little busy sometimes and I don't have the time anymore. In addition to delivery, I could certainly demo a brew day. This would be a great investment for a brew club, or an easy way into a top notch brew setup.
Thanks to HBT for the (online) fellowship, and thanks for looking.
Last edited: