FredTheNuke
Well-Known Member
OK - so to recap I understand all the info that JuanMoore provided (thank you). I have an 11 keg keezer with 5 taps. It has 2 nitrogen mixers and four secondary regulators. I am building it to essentially allow me to brew and dispense whatever I want (from 4.0 vol lambics down to 1.5 vol stouts). Each tap will have a different length line - so I will have to match the tap to the beer.
My basic House Lager carbs at 12 psi at 36F. So based on the thumbrule I would need 12 ft of normal 3/16" beverage hose. But I would prefer Bev-Seal Ultra - therefore will need 24 feet for that tap. Damn - gonna need 200 feet to install lines for these 5 taps - maybe 300 feet.... Does this sound reasonable?
Thanks!
My basic House Lager carbs at 12 psi at 36F. So based on the thumbrule I would need 12 ft of normal 3/16" beverage hose. But I would prefer Bev-Seal Ultra - therefore will need 24 feet for that tap. Damn - gonna need 200 feet to install lines for these 5 taps - maybe 300 feet.... Does this sound reasonable?
Thanks!