forgetaboudit
Well-Known Member
- Joined
- Mar 6, 2016
- Messages
- 101
- Reaction score
- 15
I just finished my DIY sighttube and its not too bad. I could've done better had I had a dremel and a little patience. But all in all, it'll do what it needs to.
Its a polycarbonate plastic tube with a compression fitting in the T. Then I used a 1/2 copper pipe and sliced it down the middle. Then I added 1/2 gallon of water and marked the pipe with a sharpie, and then cut those lines with the cutoff tool.
Maybe I'll make another pipe sleeve when I get. Dremel. Then I'll tape off the lengths of all the volume slots and make them all the same. But for now, its ok.
Its a polycarbonate plastic tube with a compression fitting in the T. Then I used a 1/2 copper pipe and sliced it down the middle. Then I added 1/2 gallon of water and marked the pipe with a sharpie, and then cut those lines with the cutoff tool.
Maybe I'll make another pipe sleeve when I get. Dremel. Then I'll tape off the lengths of all the volume slots and make them all the same. But for now, its ok.