Cap'n Jewbeard
Well-Known Member
- Recipe Type
- Partial Mash
- Yeast
- White Labs California
- Yeast Starter
- none
- Additional Yeast or Yeast Starter
- none
- Batch Size (Gallons)
- 5
- Original Gravity
- [Forgot!]
- Final Gravity
- [Not tested yet]
- Boiling Time (Minutes)
- 55
- IBU
- Unknown
- Color
- Not sure yet
- Primary Fermentation (# of Days & Temp)
- 7; about 70 degrees F
- Secondary Fermentation (# of Days & Temp)
- none
- Tasting Notes
- [Not yet finished]
Haven't bottled yet, but it looked promising when it went into primary:
3.3 lbs light LME
2 lbs. light DME
1 lb honey (clover in this case)
.5 lb crystal 20 malt
.5 lb honey malt
.5 lb carapils
.5 lb American 6-row
1 oz. Cascade hop pellets
1 oz. Saaz hop pellets
2 sticks cinnamon (3 inches each)
2 vanilla beans, split open
7 whole cloves
White Labs California yeast
1 tsp Irish moss
1) Steep grains in mesh bag in 1.5-2 gallons water at 155F for 30 minutes
--(in practice, my temp started out higher but fell to 155 over time. I just got an outdoor burner, and that thing is HOT).
2) Turn down heat; remove grains and "sparge," putting the grains in a strainer over the brewpot and pouring hot water over them until the water is clear.
3) Add both malt extracts, stirring until completely dissolved
4) Return pot to boil, add 1 oz Cascade; boil for 45 minutes
5) With 15 minutes left, add 1 tsp Irish Moss
6) Add 1 cinnamon stick and 1 vanilla bean in a hop bag (I used a tied-off bundle of cheesecloth) and continue boiling for 10 minutes
7) With 2 minutes left, add 1 oz Saaz hops
8) Turn off heat (after 55 minutes total boil), and put in another packet with 1 vanilla bean, 1 cinnamon stick, and 7 cloves); let steep for 15-20 minutes
9) Transfer wort to fermenter (you can make a cyclone to keep the hops out, but not a big deal); add cold water and/or ice to make 5 gallons
10) Pitch yeast when wort is between 70-80 F
11) Check that fermenting is done after 7 days, then prime and bottle. (I did not do a secondary here).
12) Let sit 2-3 weeks in bottle. This beer will (probably) do well over a course of several months, so don't rush to drink it all, even though you might want to!
3.3 lbs light LME
2 lbs. light DME
1 lb honey (clover in this case)
.5 lb crystal 20 malt
.5 lb honey malt
.5 lb carapils
.5 lb American 6-row
1 oz. Cascade hop pellets
1 oz. Saaz hop pellets
2 sticks cinnamon (3 inches each)
2 vanilla beans, split open
7 whole cloves
White Labs California yeast
1 tsp Irish moss
1) Steep grains in mesh bag in 1.5-2 gallons water at 155F for 30 minutes
--(in practice, my temp started out higher but fell to 155 over time. I just got an outdoor burner, and that thing is HOT).
2) Turn down heat; remove grains and "sparge," putting the grains in a strainer over the brewpot and pouring hot water over them until the water is clear.
3) Add both malt extracts, stirring until completely dissolved
4) Return pot to boil, add 1 oz Cascade; boil for 45 minutes
5) With 15 minutes left, add 1 tsp Irish Moss
6) Add 1 cinnamon stick and 1 vanilla bean in a hop bag (I used a tied-off bundle of cheesecloth) and continue boiling for 10 minutes
7) With 2 minutes left, add 1 oz Saaz hops
8) Turn off heat (after 55 minutes total boil), and put in another packet with 1 vanilla bean, 1 cinnamon stick, and 7 cloves); let steep for 15-20 minutes
9) Transfer wort to fermenter (you can make a cyclone to keep the hops out, but not a big deal); add cold water and/or ice to make 5 gallons
10) Pitch yeast when wort is between 70-80 F
11) Check that fermenting is done after 7 days, then prime and bottle. (I did not do a secondary here).
12) Let sit 2-3 weeks in bottle. This beer will (probably) do well over a course of several months, so don't rush to drink it all, even though you might want to!